Business Loans In Canada: Financing Solutions Via Alternative Finance & Traditional Funding

Business loans and finance for a business just may have gotten good again? The pursuit of credit and funding of cash flow solutions for your business often seems like an eternal challenge, even in the best of times, let alone any industry or economic crisis. Let’s dig in.

Since the 2008 financial crisis there’s been a lot of change in finance options from lenders for corporate loans. Canadian business owners and financial managers have excess from everything from peer-to-peer company loans, varied alternative finance solutions, as well of course as the traditional financing offered by Canadian chartered banks.

Those online business loans referenced above are popular and arose out of the merchant cash advance programs in the United States. Loans are based on a percentage of your annual sales, typically in the 15-20% range. The loans are certainly expensive but are viewed as easy to obtain by many small businesses, including retailers who sell on a cash or credit card basis.

Depending on your firm’s circumstances and your ability to truly understand the different choices available to firms searching for SME COMMERCIAL FINANCE options. Those small to medium sized companies ( the definition of ‘ small business ‘ certainly varies as to what is small – often defined as businesses with less than 500 employees! )

How then do we create our road map for external financing techniques and solutions? A simpler way to look at it is to categorize these different financing options under:

Debt / Loans

Asset Based Financing

Alternative Hybrid type solutions

Many top experts maintain that the alternative financing solutions currently available to your firm, in fact are on par with Canadian chartered bank financing when it comes to a full spectrum of funding. The alternative lender is typically a private commercial finance company with a niche in one of the various asset finance areas

If there is one significant trend that’s ‘ sticking ‘it’s Asset Based Finance. The ability of firms to obtain funding via assets such as accounts receivable, inventory and fixed assets with no major emphasis on balance sheet structure and profits and cash flow ( those three elements drive bank financing approval in no small measure ) is the key to success in ABL ( Asset Based Lending ).

Factoring, aka ‘ Receivable Finance ‘ is the other huge driver in trade finance in Canada. In some cases, it’s the only way for firms to be able to sell and finance clients in other geographies/countries.

The rise of ‘ online finance ‘ also can’t be diminished. Whether it’s accessing ‘ crowdfunding’ or sourcing working capital term loans, the technological pace continues at what seems a feverish pace. One only has to read a business daily such as the Globe & Mail or Financial Post to understand the challenge of small business accessing business capital.

Business owners/financial mgrs often find their company at a ‘ turning point ‘ in their history – that time when financing is needed or opportunities and risks can’t be taken. While putting or getting new equity in the business is often impossible, the reality is that the majority of businesses with SME commercial finance needs aren’t, shall we say, ‘ suited’ to this type of funding and capital raising. Business loan interest rates vary with non-traditional financing but offer more flexibility and ease of access to capital.

We’re also the first to remind clients that they should not forget govt solutions in business capital. Two of the best programs are the GovernmentSmall Business Loan Canada (maximum availability = $ 1,000,000.00) as well as the SR&ED program which allows business owners to recapture R&D capital costs. Sred credits can also be financed once they are filed.

Those latter two finance alternatives are often very well suited to business start up loans. We should not forget that asset finance, often called ‘ ABL ‘ by those Bay Street guys, can even be used as a loan to buy a business.

If you’re looking to get the right balance of liquidity and risk coupled with the flexibility to grow your business seek out and speak to a trusted, credible and experienced Canadian business financing advisor with a track record of business finance success who can assist you with your funding needs.

Shoe Repairs And Several Other Things When I Was 7

Shoe Repairs And Several Other Things When I Was 7
My Dad repaired most of our shoes believe it or not, I can hardly believe it myself now. With 7 pairs of shoes always needing repairs I think he was quite clever to learn how to “Keep us in shoe Leather” to coin a phrase!

He bought several different sizes of cast iron cobbler’s “lasts”. Last, the old English “Laest” meaning footprint. Lasts were holding devices shaped like a human foot. I have no idea where he would have bought the shoe leather. Only that it was a beautiful creamy, shiny colour and the smell was lovely.

But I do remember our shoes turned upside down on and fitted into these lasts, my Dad cutting the leather around the shape of the shoe, and then hammering nails, into the leather shape. Sometimes we’d feel one or 2 of those nails poking through the insides of our shoes, but our dad always fixed it.

Hiking and Swimming Galas
Dad was a very outdoorsy type, unlike my mother, who was probably too busy indoors. She also enjoyed the peace and quiet when he took us off for the day!

Anyway, he often took us hiking in the mountains where we’d have a picnic of sandwiches and flasks of tea. And more often than not we went by steam train.

We loved poking our heads out of the window until our eyes hurt like mad from a blast of soot blowing back from the engine. But sore, bloodshot eyes never dampened our enthusiasm.

Dad was an avid swimmer and water polo player, and he used to take us to swimming galas, as they were called back then. He often took part in these galas. And again we always travelled by steam train.

Rowing Over To Ireland’s Eye
That’s what we did back then, we had to go by rowboat, the only way to get to Ireland’s eye, which is 15 minutes from mainland Howth. From there we could see Malahide, Lambay Island and Howth Head of course. These days you can take a Round Trip Cruise on a small cruise ship!

But we thoroughly enjoyed rowing and once there we couldn’t wait to climb the rocks, and have a swim. We picnicked and watched the friendly seals doing their thing and showing off.

Not to mention all kinds of birdlife including the Puffin.The Martello Tower was also interesting but a bit dangerous to attempt entering. I’m getting lost in the past as I write, and have to drag myself back to the present.

Fun Outings with The camera Club
Dad was also a very keen amateur photographer, and was a member of a camera Club. There were many Sunday photography outings and along with us came other kids of the members of the club.

And we always had great fun while the adults busied themselves taking photos of everything and anything, it seemed to us. Dad was so serious about his photography that he set up a dark room where he developed and printed his photographs.

All black and white at the time. He and his camera club entered many of their favourites in exhibitions throughout Europe. I’m quite proud to say that many cups and medals were won by Dad. They have been shared amongst all his grandchildren which I find quite special.

He liked taking portraits of us kids too, mostly when we were in a state of untidiness, usually during play. Dad always preferred the natural look of messy hair and clothes in the photos of his children.

Pharmacy Technician – A Closer Look

In the not so distant past when you walked into a pharmacy needing to get a prescription filled you would have, in most instances, found that your prescription was actually filled by the on duty pharmacists. However, over the past few years a change has occurred in the pharmacist arena and that change is, “a pharmacist probably no longer filling your prescriptions”. Although pharmacists are on duty wherever medications are dispensed; today in most instances, a pharmacy technician or pharmacy assistant are the ones filling prescriptions.Pharmacy Technicians and assistants have existed for some time but their roles have evolved for a variety of reasons. A big reason is that they help to reduce health care costs because they get paid much less than a certified pharmacist. Another important reason is that it simply makes sense. Pharmacy technicians and assistants are trained to handle routine work (fill prescriptions and customer service), which frees up the pharmacists to focus more of their time on supervisory duties, as well as patient care.Melissa Murer, Executive Director of the Pharmacy Technician Certification Board, put it this way, “Pharmacists are becoming more focused on patient care, so pharmacy technicians are needed to perform more of the distributive functions.”In this brief (but hopefully informative article) I attempt to demonstrate what pharmacy technician and assistants do and where they do it.In general, they assist licensed pharmacists in providing medication and health care to patients by preparing and filling prescriptions and performing clerical tasks. Duties are similar but pharmacy technicians generally have more responsibilities. In addition, technicians and assistants are required to be closely supervised by a licensened pharmacist, although the laws defining what “being supervised” entails, varies by state.In addition to having all of their prescriptions checked by a pharmacist, technicians and assistants must also direct all patient questions regarding drug information, health matters or prescriptions to the pharmacist.Pharmacy Technicians
Technicians follow specific procedures when filling prescriptions. After receiving an initial prescription or refill request, they must verify that the prescription information is accurate and then count, pour, retrieve, weigh, measure and if necessary, mix the required medication for the prescription. The next step is to prepare and affix the labels to the proper container. After filling the prescription the technician will then price and file it. Another important aspect of a technician’s job is to prepare patient insurance forms and establish and maintain patient profiles.In retail pharmacies, technicians will also stock and take inventory of medications (both prescription and over-the-counter) maintain equipment and help manage the till.In many hospitals, technicians have the responsibility to read the doctors orders from a patients’ chart, prepare and then deliver the medication after it’s been checked by a pharmacist. They may also enter information about patients’ medical records (regarding their medications) or put together a supply (normally 24 hours) of medicine for patients, including the labeling and packaging of each dose. But just like technicians working in a retail pharmacy, each package is checked by the supervising pharmacist before being given to a patient and they also maintain inventories of medicine and other supplies.Pharmacy Assistants
Duties are similar to pharmacy technicians and while hospitals and pharmacies employ pharmacy assistants, the number of available positions is generally less than technicians. In retail pharmacies they work as clerks or cashiers, answer phones, handle money and perform clerical duties. In hospitals they also deliver medications and assist in stocking shelves.Pharmacy technicians and assistants work in clean well-organized areas but are required to spend most of their workday on their feet. And because more and more pharmacies are open 24-hours a day work hours can vary with technicians and assistants are often required to work odds hours (nights, evenings and weekends). Therefore, there are many opportunities to work part-time in 24-hour pharmacies. In addition, a percentage of both technicians and assistants work part time because they are studying to become pharmacists.States have traditionally required a one-to-one ratio of pharmacist to technician but that is also expected to change. Mark Boesen, Director of Government and Student Affairs for the American Association of Colleges of Pharmacy, has stated that: “Many of the major employers of technicians are expanding the number of their facilities and boards of pharmacy in some States are allowing the legal ratio of technicians to pharmacists to expand. This is a very promising field to work in.”An increasing demand for technicians with greater responsibility has prompted some States to revise their one-to-one ratio of pharmacist to technician to two or three technicians per pharmacist.As pharmacy technicians take on more and more tasks previously performed by pharmacists, they must also learn and master new technology. A good example is the increased use (by many pharmacies) of robotic machines to dispense medicines. Technicians will be required to oversee the machine, stock bins and label containers.This article may be reproduced only in its entirety.